Home › Swimming Pool Chemicals › Pool Clear — Swimming Pool Clarifier, 1L
24% OFF
SKU SPPCL1L
Pool Clear — Swimming Pool Clarifier, 1L
Organic polymer clarifier for cloudy pool water. Catches particles below 0.5 micron so the filter can remove them.
Be the first to review this product
₹1,450
₹1,899MRP
You save ₹449 (24% off)
Inclusive of all taxes · GST invoice provided
In stock · dispatched within 24 working hours
Free delivery
above ₹499
above ₹499
3–4 day delivery
across India
across India
Buying in bulk? Institutional pricing, custom pack sizes and GST invoicing available. Request a quote ›
PRODUCT DESCRIPTION
Chemtex Pool Clear is an organic polymer clarifier for cloudy swimming pool water. It flocculates the suspended matter a filter cannot catch - dust, pollen, body oils, sunscreen, fine silt and dead algae - into particles large enough for the filter to hold, down to below 0.5 micron. Water that has gone hazy despite a correct chlorine level is almost always this problem, and shocking it again will not fix it.
Dose 1 litre per 1,00,000 litres, so a home pool needs very little: 100 ml for 10,000 litres, 200 ml for 20,000, 250 ml for 25,000. A 1-litre bottle treats a 10,000-litre pool about ten times over. The water is clear once the pump has completed four to six turnovers, so a morning treatment usually gives you the pool back the same day.
This is the product that saves a home pool from being drained. The usual response to milky water is to empty it, refill from a tanker and spend a week getting the chemistry back - several thousand rupees and a fortnight of the season gone, for a problem that is only suspended dust and sunscreen. Clarify instead, clean the filter afterwards, and the water is the same water.
FEATURES & BENEFITS
- Catches sub-micron particles — Flocculates matter finer than 0.5 micron - the fraction that passes straight through sand and keeps water looking milky at a perfect chlorine level.
- Clear in four to six turnovers — Normally fully clear once the pump has turned the pool volume over four to six times.
- No shock, no draining — Replaces the shock-and-refill routine for cloudy water, which costs a tankerload of water and a week of rebalancing.
- Lifts oils and sunscreen too — Traps body oil, sunscreen and the scum line they leave at the waterline, not just mineral silt.
- Filter-safe polymer — Organic polymer base, compatible with sand, cartridge and diatomaceous earth filters and with chlorine dosing.
HOW TO USE
- Work out your pool volume — Length (m) × width (m) × average depth (m) × 1,000 = volume in litres. A 10 m × 5 m pool averaging 1.4 m deep holds 70,000 litres. Every dose below is per litre of pool water, so this number is the only one you need.
- Measure the dose — 1 litre per 1,00,000 litres: 100 ml for a 10,000-litre pool, 500 ml for 50,000 litres. Increase it if the water is heavily turbid rather than just hazy.
- Dose around the whole periphery — Pour it right around the edge of the pool rather than at one point, so it starts working across the full surface.
- Mix the water — Agitate with a pool wiper or brush pole to get an even mix. The polymer needs to meet the suspended matter to flocculate it.
- Filter for four to six turnovers — Keep the pool out of use for about 3 hours and leave the filtration running. Backwash or clean the filter afterwards - it is now holding everything it collected.
