Home › Swimming Pool Chemicals › Pool Wash — Swimming Pool Tile Cleaner, 1L
18% OFF
SKU SPPW1L
Pool Wash — Swimming Pool Tile Cleaner, 1L
Ready-to-use acid tile cleaner for the pool waterline. Removes calcium carbonate scale and hard-water deposits from glazed tile.
Be the first to review this product
₹329
₹399MRP
You save ₹70 (18% off)
Inclusive of all taxes · GST invoice provided
In stock · dispatched within 24 working hours
Free delivery
above ₹499
above ₹499
3–4 day delivery
across India
across India
Buying in bulk? Institutional pricing, custom pack sizes and GST invoicing available. Request a quote ›
PRODUCT DESCRIPTION
Chemtex Pool Wash is a ready-to-use single-acid cleaner for the scale line on swimming pool tiles, walls and spa surfaces. It dissolves the calcium carbonate crust and hard-water deposit that builds along the waterline in Indian tap water - the grey-white band no amount of brushing shifts - and leaves the tiles bright without dulling the glaze.
No dilution and no mixing: spray it straight onto the deposit, leave it ten minutes, scrub gently and rinse. The 1-litre bottle is the spot-cleaning size - the waterline band on one wall, the step treads, the spa surround, the patch of tile under the inlet that always scales first. It is a medium-strength acid rather than a harsh one, so it is safe for routine use on concrete, rubber, plastic, glass, stone and glazed tile.
For a home pool this is the difference between a pool that looks maintained and one that does not. The grey-white band at the waterline is the first thing a visitor notices and the one thing brushing never removes, because it is mineral rather than dirt. Ten minutes of contact time per wall, once or twice a season, keeps it away. Run the pump for two to three turnovers afterwards and re-check pH, since acid work at the waterline pulls pool pH down.
FEATURES & BENEFITS
- Ready to use — No dilution, no mixing, no measuring. Spray it on the deposit as supplied.
- Shifts heavy scale — Dissolves the calcium carbonate and hard-water crust at the waterline that brushing and general-purpose cleaner will not touch.
- Safe on glazed tile — Medium-strength single-acid formula - it removes the deposit without etching the glaze, so it can be used every season.
- Wide surface compatibility — Safe on concrete, rubber, plastic, glass, stone and glazed surfaces, so the same bottle does tiles, coping and steps.
- Phosphate-free — No phosphates, so cleaning does not leave behind the nutrient that algae blooms on a week later.
HOW TO USE
- Handle it as a chemical — Wear gloves and eye protection. Add the product to water, never water to the product. Store the pack closed, upright, out of sun and away from other pool chemicals.
- Spray it on undiluted — Apply directly to the scaled tiles, waterline or spa surface. Work in sections you can rinse before the product dries.
- Leave it ten minutes — A ten-minute contact period does the work. Scrubbing early just spreads it around; scrubbing after is where the deposit comes off.
- Scrub gently and rinse — Work the loosened deposit off with a pool brush or pad and rinse thoroughly with water. Repeat on any band that is still grey.
- Turn the water over before swimming — Run the pump for at least two to three full turnovers, then re-test pH and correct - acid cleaning pulls pool pH down.
